A slow drain is a warning. By the time it's a complete blockage, you're losing use of your kitchen, bathroom, or laundry room entirely. Masters Plumbing Service's drain techs in Hubertus, WI use hydro-jetting equipment rated to 4,000 PSI and CCTV pipeline cameras to locate, clear, and document the obstruction — not just temporarily push it further down the line.
📞 Call +1-855-718-1500 — Book Today
Retail drain products and inexperienced plumbers share one problem: they treat the symptom, not the cause. Our approach combines the right equipment with the right diagnostic process.
Our truck-mounted hydro-jetting units propel water at up to 4,000 PSI through a rotating nozzle that scours pipe walls clean — removing grease buildup, scale, and soft root intrusions in a single pass. Unlike augers, jetting leaves the pipe interior clean rather than just piercing a hole through the clog.
Before recommending any clearing method, we run a push-rod camera into the drain to visually confirm blockage type and location. Grease accumulation 30 feet in looks different from a root ball at a joint or a collapsed section — and each requires a different response.
Whether it's a backed-up bathroom sink or a full house sewer drain stoppage, our team carries the right nozzle sizes and cable diameters for the specific pipe we're clearing.
We photograph or record camera footage of the drain before and after clearing so you can see exactly what was there and that it's gone. Every job comes with a flat-rate quote before any work begins — no hourly-rate surprises.
Not every blocked drain is the same problem. Here's how our team approaches each type — with the specific tools and technique that actually resolve it.
Grease blockages in kitchen drain lines often occur 10–40 feet from the drain opening, past the p-trap, where the line cools and FOG solidifies. Our jetting equipment reaches and clears these deposits where a plunger or retail product cannot.
Hair and soap scum are the most common bathroom drain blockages. They bond to the pipe walls inside the p-trap and in the drain arm, forming a mat that progressively constricts flow. Our techs remove the drain cover, clear the p-trap obstruction with a hand snake or drum auger, and flush the line.
When multiple fixtures are draining slowly or backing up simultaneously, the blockage is typically in the main sewer line — the 4" or 6" pipe that carries all household waste to the municipal main or septic system. We access the main line through the cleanout, run a CCTV camera to identify the obstruction type, then clear with a sectional cable machine or hydro-jetter depending on what we find.
Basement floor drains and laundry room drains often go years without cleaning and can develop sediment, lint, and mineral scale blockages. We clear these drains with an electric snake and flush thoroughly to confirm full flow before closing out the job.
A preventive jetting program documented over multiple visits gives you both clean pipes and a camera record of pipe condition over time — useful for catching structural deterioration before it causes an emergency.
Sometimes the question isn't just "why is this draining slowly" but "what is the actual condition of this pipe system." We run a recorded CCTV inspection with distance markings and provide a written report noting blockage types, root intrusion points, joint offsets, pipe material, and any visible structural defects.
We don't show up and start snaking blind. Our approach uses a camera-first diagnostic protocol to confirm what we're clearing before selecting the method.
Tell our dispatcher which fixtures are affected — one slow drain vs. multiple backed-up fixtures tells us whether we're likely dealing with a localized clog or a main line blockage. We schedule same-day when slots are available.
The camera also gives us the distance to the blockage and confirms the pipe diameter — both factors in selecting the right clearing method and nozzle size.
If the camera reveals a structural problem that will require repair rather than just clearing, we tell you that now rather than letting you pay for a clearing that won't last.
If anything was found during the camera run that warrants monitoring or repair, it's noted in the written report so you have a record — useful for planning future maintenance or a repair conversation.

Called about a kitchen drain that three other plumbers had snaked without long-term success. Masters Plumbing Service ran a camera first and found grease buildup 28 feet in, past where any hand snake reaches. Hydro-jetted it, re-scoped to confirm clean, and the drain has run perfectly in the months since.
Main line backed up completely on a Sunday. Found Masters Plumbing Service and they came within 2 hours. Camera found a 3-inch grease plug combined with roots at a joint. Cleared both with cable and jetter, sent me the scope video via email. Super transparent process.
We own a rental property and schedule annual hydro-jet maintenance with Masters Plumbing Service. The jetting intervals have gotten the drain-related tenant calls down to nearly zero. The camera documentation each year also gives us a clear record of pipe condition over time.

Masters Plumbing Service provides professional Drain Cleaning across Hubertus and the surrounding Hubertus, WI service area. Same-day service is available on most calls — call to check today's availability.

Stop pouring chemicals down the drain and getting two-day results. Our drain techs in Hubertus, WI use the right equipment to clear it properly and confirm it's clear on camera before we leave.
📞 Call +1-855-718-1500 Now